前言：
关于ro.serialno这个属性，相信大家都不陌生了，应用层的Build.getSerial()，Build.SERIAL等均是直接或间接的获取了这个属性值。接下来从boot到系统应用，小小的分析一下它的整个流程：
由于是APP经常使用，那我们从应用层分析到底层kernel/boot
一，framework层
好的，我们进入安卓源码目录，grep查找一下：
xxxx@server01:~/workspace/rk3128_tablet$ grep -nrw "SERIAL" frameworks/base/
frameworks/base/docs/html/about/versions/android-4.2.jd:364:address or the {@link android.os.Build#SERIAL} number), they will provide the same value for each
frameworks/base/api/test-current.txt:28614: field public static final java.lang.String SERIAL;
frameworks/base/api/system-current.txt:31035: field public static final java.lang.String SERIAL;
frameworks/base/api/current.txt:28540: field public static final java.lang.String SERIAL;
frameworks/base/core/java/android/os/Build.java:102: public static final String SERIAL = getString("ro.serialno");
frameworks/base/tests/AccessoryDisplay/sink/src/com/android/accessorydisplay/sink/SinkActivity.java:61: private static final String SERIAL = "0000000012345678";
frameworks/base/tests/AccessoryDisplay/sink/src/com/android/accessorydisplay/sink/SinkActivity.java:254: sendString(conn, UsbAccessoryConstants.ACCESSORY_STRING_SERIAL, SERIAL);
xxxx@server01:~/workspace/rk3128_tablet$
成功的在Build.java找到了这个SERIAL属性，我们继续往下跟getString这个方法大概在871行。
.....
/**
* Returns the version string for the radio firmware. May return
* null (if, for instance, the radio is not currently on).
*/
public static String getRadioVersion() {
return SystemProperties.get(TelephonyProperties.PROPERTY_BASEBAND_VERSION, null);
}
private static String getString(String property) {
return SystemProperties.get(property, UNKNOWN);
}
private static String[] getStringList(String property, String separator) {
String value = SystemProperties.get(property);
if (value.isEmpty()) {
return new String[0];
} else {
return value.split(separator);
}
}
.....
SystemProperties大家应该很熟了
可以看出，getString是传入的"ro.serialno"这个字串去获取的属性中的值，其效果在命令行上相当于getprop ro.serialno。
好的，framework分析到这。
二，系统层
我们从第一个程序init开始，源码路径：
your_pro/system/core/init/init.cpp
根据关键字ro.serialno找到了地方，大概在464行：
static void export_kernel_boot_props() {
char cmdline[1024];
char* s1;
char* s2;
char* s3;
char* s4;
struct {
const char *src_prop;
const char *dst_prop;
const char *default_value;
} prop_map[] = {
{ "ro.boot.serialno", "ro.serialno", "", },//就是这了，根据ro.boot.serialno的值设置ro.serialno的值
{ "ro.boot.mode", "ro.bootmode", "unknown", },
{ "ro.boot.baseband", "ro.baseband", "unknown", },
{ "ro.boot.bootloader", "ro.bootloader", "unknown", },
{ "ro.boot.hardware", "ro.hardware", "unknown", },
{ "ro.boot.revision", "ro.revision", "0", },
};
//if storagemedia is emmc, so we will wait emmc init finish
for (int i = 0; i < EMMC_RETRY_COUNT; i++) {
proc_read( "/proc/cmdline", cmdline, sizeof(cmdline) );
s1 = strstr(cmdline, STORAGE_MEDIA);
s2 = strstr(cmdline, "androidboot.mode=emmc");
s3 = strstr(cmdline, "storagemedia=nvme");
s4 = strstr(cmdline, "androidboot.mode=nvme");
if ((s1 == NULL) && (s3 == NULL)) {
//storagemedia is unknow
break;
}
if ((s1 > 0) && (s2 > 0)) {
ERROR("OK,EMMC DRIVERS INIT OKn");
property_set("ro.boot.mode", "emmc");
break;
} else if ((s3 > 0) && (s4 > 0)) {
ERROR("OK,NVME DRIVERS INIT OKn");
property_set("ro.boot.mode", "nvme");
break;
} else {
ERROR("OK,EMMC DRIVERS NOT READY, RERRY=%dn", i);
usleep(10000);
}
}
for (size_t i = 0; i < ARRAY_SIZE(prop_map); i++) {//这里这里
std::string value = property_get(prop_map[i].src_prop);
property_set(prop_map[i].dst_prop, (!value.empty()) ? value.c_str() : prop_map[i].default_value);
}
/* save a copy for init's usage during boot */
std::string bootmode_value = property_get("ro.bootmode");
if (!bootmode_value.empty())
strlcpy(bootmode, bootmode_value.c_str(), sizeof(bootmode));
/* if this was given on kernel command line, override what we read
* before (e.g. from /proc/cpuinfo), if anything */
std::string hardware_value = property_get("ro.boot.hardware");
if (!hardware_value.empty())
strlcpy(hardware, hardware_value.c_str(), sizeof(hardware));
property_set("ro.hardware", hardware);
symlink_fstab();
}
以上代码针对于ro.serialno的大致意思就是根据ro.boot.serialno的值设它。
但是，ro.boot.serialno在哪还不知道呢，我们继续。
好的，分析开始
从mian开始，找到第一阶段需要执行的代码
int main(int argc, char** argv) {
....
if (!is_first_stage) {
// Indicate that booting is in progress to background fw loaders, etc.
close(open("/dev/.booting", O_WRONLY | O_CREAT | O_CLOEXEC, 0000));
property_init();
// If arguments are passed both on the command line and in DT,
// properties set in DT always have priority over the command-line ones.
process_kernel_dt();
process_kernel_cmdline();//根据函数名字就大概知道，这是处理内核cmdline的函数
//add by xzj to set ro.rk.soc read from /proc/cpuinfo if not set
set_soc_if_need();
// Propagate the kernel variables to internal variables
// used by init as well as the current required properties.
export_kernel_boot_props();//这里就是将处理完cmdline的相关的boot属性输出,我们上面已经分析过这个函数了
}
....
}
先看process_kernel_cmdline函数：
这里做了两个动作，改cmdline的权限和设置import_kernel_nv这个回调函数
static void process_kernel_cmdline() {
// Don't expose the raw commandline to unprivileged processes.
chmod("/proc/cmdline", 0440);
// The first pass does the common stuff, and finds if we are in qemu.
// The second pass is only necessary for qemu to export all kernel params
// as properties.
import_kernel_cmdline(false, import_kernel_nv);
if (qemu[0]) import_kernel_cmdline(true, import_kernel_nv);
}
回调函数import_kernel_nv将传入的cmdline中的条目解析并且设置property
static void import_kernel_nv(const std::string& key, const std::string& value, bool for_emulator) {
if (key.empty()) return;
if (for_emulator) {
// In the emulator, export any kernel option with the "ro.kernel." prefix.
property_set(android::base::StringPrintf("ro.kernel.%s", key.c_str()).c_str(), value.c_str());
return;
}
if (key == "qemu") {
strlcpy(qemu, value.c_str(), sizeof(qemu));
} else if (android::base::StartsWith(key, "androidboot.")) {
property_set(android::base::StringPrintf("ro.boot.%s", key.c_str() + 12).c_str(),
value.c_str());
}
}
再看看import_kernel_cmdline做了什么动作？
这里从/proc/cmdline读出数据，然后以空格“ ”分开数据，for循环调用传入的回调函数指针fn，也就是import_kernel_nv函数，再将分开的数据传参入回调函数。
void import_kernel_cmdline(bool in_qemu,
std::function<void(const std::string&, const std::string&, bool)> fn) {
std::string cmdline;
android::base::ReadFileToString("/proc/cmdline", &cmdline);
for (const auto& entry : android::base::Split(android::base::Trim(cmdline), " ")) {
std::vector<std::string> pieces = android::base::Split(entry, "=");
if (pieces.size() == 2) {
fn(pieces[0], pieces[1], in_qemu);
}
}
}
这里小小的总结下：
从上面的步骤跟踪下来，发现整体流程是将从boot传给kernel的cmdline中的androidboot.serialno赋给ro.boot.serialno，然后再根据ro.boot.*相关的属性去设置export_kernel_boot_props函数中prop_map这个数组对应的ro. 属性。
举个栗子，此处serialno的流程就该为：
boot- > kernel cmdline -> androidboot.serialno -> ro.boot.serialno -> ro.serialno -> 然后再被prop调用
到这里，只有kernel cmdline之前的流程不知道了，具体boot是怎么将一堆东西传给/proc/cmdline的呢？
好的，安排它~
三，u-Boot层
继续进uboot目录搜索一下：
xxx@server01:~/workspace/rk3128_tablet$ grep -nrw "androidboot.serialno" u-boot/
匹配到二进制文件 u-boot/u-boot.bin
匹配到二进制文件 u-boot/common/cmd_bootrk.o
匹配到二进制文件 u-boot/common/built-in.o
匹配到二进制文件 u-boot/uboot.img
匹配到二进制文件 u-boot/u-boot
u-boot/include/fastboot.h:81:#define FASTBOOT_SERIALNO_BOOTARG "androidboot.serialno"
xxx@server01:~/workspace/rk3128_tablet$
找到一个FASTBOOT_SERIALNO_BOOTARG，继续搜它，看谁用了
xtw-cl@server01:~/workspace/pnd_rk3128_tablet$ grep -nrw "FASTBOOT_SERIALNO_BOOTARG" u-boot/
u-boot/common/cmd_bootrk.c:583: if (!strstr(command_line, FASTBOOT_SERIALNO_BOOTARG)) {
u-boot/common/cmd_bootrk.c:585: "%s %s=%s", command_line, FASTBOOT_SERIALNO_BOOTARG, sn);
u-boot/include/fastboot.h:81:#define FASTBOOT_SERIALNO_BOOTARG "androidboot.serialno"
xtw-cl@server01:~/workspace/pnd_rk3128_tablet$
找到了，u-boot/common/cmd_bootrk.c文件
好的，开始分析源码：
static void rk_commandline_setenv(const char *boot_name, rk_boot_img_hdr *hdr, bool charge)
{
....
snprintf(command_line, sizeof(command_line),
"%s SecureBootCheckOk=%d", command_line, SecureBootCheckOK);
char *sn = getenv("fbt_sn#");
if (sn != NULL) {
/* append serial number if it wasn't in device_info already */
if (!strstr(command_line, FASTBOOT_SERIALNO_BOOTARG)) {
snprintf(command_line, sizeof(command_line),
"%s %s=%s", command_line, FASTBOOT_SERIALNO_BOOTARG, sn);
}
}
command_line[sizeof(command_line) - 1] = 0;
setenv("bootargs", command_line);
#endif /* CONFIG_CMDLINE_TAG */
}
从源码可得知，androidboot.serialno的这个sn参数是通过getenv("fbt_sn#")获取到的，好的，继续搜索fbt_sn#看看是哪里设置的这个环境变量
xxx@server01:~/workspace/rk3128_tablet$ grep -nrw "fbt_sn#" u-boot/
匹配到二进制文件 u-boot/u-boot.bin
u-boot/common/cmd_bootrk.c:580: char *sn = getenv("fbt_sn#");
匹配到二进制文件 u-boot/common/cmd_fastboot.o
匹配到二进制文件 u-boot/common/cmd_bootrk.o
u-boot/common/cmd_fastboot.c:662: //setenv("fbt_sn#", serial_number);
u-boot/common/cmd_fastboot.c:668: char *sn = getenv("fbt_sn#");
匹配到二进制文件 u-boot/common/built-in.o
u-boot/board/rockchip/rk33xx/rk33xx.c:226: setenv("fbt_sn#", tmp_buf);
u-boot/board/rockchip/rk32xx/rk32xx.c:220: setenv("fbt_sn#", tmp_buf);
匹配到二进制文件 u-boot/board/rockchip/rk32xx/rk32xx.o
匹配到二进制文件 u-boot/board/rockchip/rk32xx/built-in.o
匹配到二进制文件 u-boot/uboot.img
匹配到二进制文件 u-boot/u-boot
xxx@server01:~/workspace/rk3128_tablet$
可以得知，设setenv的有两个，但是我们生成的二进制文件是rk32xx.o，所以我们分析rk32xx.c这个源码。
#ifdef CONFIG_BOARD_LATE_INIT
extern char bootloader_ver[24];
int board_late_init(void)
{
debug("board_late_initn");
....
char tmp_buf[32];
/* rk sn size 30bytes, zero buff */
memset(tmp_buf, 0, 32);
if (rkidb_get_sn(tmp_buf)) {
setenv("fbt_sn#", tmp_buf);
}
debug("fbt prebootn");
board_fbt_preboot();
return 0;
}
#endif
从上面可以看出设进fbt_sn#属性名字的tmp_buf是从rkidb_get_sn函数获取的，so继续。
顺便提一句，board_late_init会在环境初始化函数中调用，而它会被启动的更底层的汇编程序调用，这里不展开讲
搜一下这个rkidb_get_sn函数
xxxx@server01:~/workspace/rk3128_tablet$ grep -nrw "rkidb_get_sn" u-boot/
u-boot/board/rockchip/rk33xx/rk33xx.c:225: if (rkidb_get_sn(tmp_buf)) {
u-boot/board/rockchip/rk32xx/rk32xx.c:219: if (rkidb_get_sn(tmp_buf)) {
匹配到二进制文件 u-boot/board/rockchip/rk32xx/rk32xx.o
匹配到二进制文件 u-boot/board/rockchip/rk32xx/built-in.o
u-boot/board/rockchip/common/rkloader/idblock.c:565:int rkidb_get_sn(char* buf)
u-boot/board/rockchip/common/rkloader/idblock.su:7:idblock.c:565:5:rkidb_get_sn 16 static
u-boot/board/rockchip/common/rkloader/idblock.h:252:int rkidb_get_sn(char *buf);
匹配到二进制文件 u-boot/board/rockchip/common/rkloader/idblock.o
匹配到二进制文件 u-boot/board/rockchip/common/built-in.o
u-boot/u-boot.map:1468: .text.rkidb_get_sn
u-boot/u-boot.map:1470: 0x0000000060008bc4 rkidb_get_sn
u-boot/u-boot.map:4608: .rel.text.rkidb_get_sn
u-boot/System.map:219:60008bc4 T rkidb_get_sn
匹配到二进制文件 u-boot/u-boot
xxxx@server01:~/workspace/rk3128_tablet$
实现在u-boot/board/rockchip/common/rkloader/idblock.c文件，打开它
int (char* buf)
{
int size;
Sector3Info *pSec3;
uint8 *pidbbuf = (uint8 *)gIdDataBuf;
pSec3 = (Sector3Info *)(pidbbuf + IDBLOCK_SIZE * IDBLOCK_SN);
size = pSec3->snSize;
if (size <= 0 || size > SN_MAX_SIZE) {
PRINT_E("empty serial no.n");
return false;
}
strncpy(buf, (char *)pSec3->sn, size);
buf[size] = ' ';
PRINT_E("sn: %sn", buf);
return true;
}
可以看出是通过ID Block去读的，通过地址偏移取值拿到的，那我们继续找寻哪里给这个gIdDataBuf赋的值。
搜索一下，根据搜索出的信息去筛选
xxxxx@server01:~/workspace/rk3128_tablet$ grep -nrw "gIdDataBuf" u-boot/
匹配到二进制文件 u-boot/board/rockchip/common/storage/storage.o
u-boot/board/rockchip/common/storage/storage.h:197:EXT uint32 gIdDataBuf[512] __attribute__((aligned(ARCH_DMA_MINALIGN)));
u-boot/board/rockchip/common/SecureBoot/SecureBoot.c:133: FlashSramLoadStore(&gIdDataBuf[384], 1536, 1, 512); // idblk sn info
匹配到二进制文件 u-boot/board/rockchip/common/SecureBoot/SecureBoot.o
匹配到二进制文件 u-boot/board/rockchip/common/mediaboot/sdmmcBoot.o
u-boot/board/rockchip/common/mediaboot/sdmmcBoot.c:120: ret1 = SDM_Read(ChipSel, SD_CARD_BOOT_PART_OFFSET, 4, gIdDataBuf);
u-boot/board/rockchip/common/mediaboot/sdmmcBoot.c:123: if (gIdDataBuf[0] == 0xFCDC8C3B) {
匹配到二进制文件 u-boot/board/rockchip/common/mediaboot/sdmmcBoot.c
u-boot/board/rockchip/common/mediaboot/UMSBoot.c:307: __UMSReadLBA(usb_stor_curr_dev, UMS_BOOT_PART_OFFSET, gIdDataBuf, 4);
u-boot/board/rockchip/common/mediaboot/UMSBoot.c:308: if (gIdDataBuf[0] == 0xFCDC8C3B) {
u-boot/board/rockchip/common/mediaboot/UMSBoot.c:309: if (0 == gIdDataBuf[128+104/4]) {
u-boot/board/rockchip/common/mediaboot/UMSBoot.c:313: } else if (1 == gIdDataBuf[128+104/4]) {
u-boot/board/rockchip/common/mediaboot/sdhciBoot.c:53: block_mmc_read(SDHCI_EMMC_DEV_ID, SD_CARD_BOOT_PART_OFFSET, 4, gIdDataBuf);
u-boot/board/rockchip/common/rkloader/idblock.c:30:extern uint32 gIdDataBuf[512];
u-boot/board/rockchip/common/rkloader/idblock.c:505: pdst = (uint8 *)gIdDataBuf;
u-boot/board/rockchip/common/rkloader/idblock.c:512: GetIdblockDataNoRc4((char *)&gIdDataBuf[128 * 2], 512);
u-boot/board/rockchip/common/rkloader/idblock.c:513: GetIdblockDataNoRc4((char *)&gIdDataBuf[128 * 3], 512);
u-boot/board/rockchip/common/rkloader/idblock.c:532: if (gIdDataBuf[0] == 0xFCDC8C3B) {
u-boot/board/rockchip/common/rkloader/idblock.c:533: memcpy((char *)&idb0_info, gIdDataBuf, 512);
u-boot/board/rockchip/common/rkloader/idblock.c:545: uint8 *buf = (uint8 *)&gIdDataBuf[0];
u-boot/board/rockchip/common/rkloader/idblock.c:569: uint8 *pidbbuf = (uint8 *)gIdDataBuf;
u-boot/board/rockchip/common/rkloader/idblock.c:588: uint8 *pidbbuf = (uint8 *)gIdDataBuf;
u-boot/board/rockchip/common/rkloader/idblock.c:609: uint8 *pidbbuf = (uint8 *)gIdDataBuf;
匹配到二进制文件 u-boot/board/rockchip/common/rkloader/idblock.o
匹配到二进制文件 u-boot/board/rockchip/common/built-in.o
u-boot/u-boot.map:6203: .bss.gIdDataBuf
u-boot/u-boot.map:6205: 0x000000006009b5c0 gIdDataBuf
u-boot/System.map:1464:6009b5c0 B gIdDataBuf
匹配到二进制文件 u-boot/u-boot
xxxxx@server01:~/workspace/rk3128_tablet$
我们这里的目的是需要知道哪里给gIdDataBuf其赋值，所以我们直接查看有编译到产出.o文件的并且有可能是直接给它赋值的文件及函数位置。
文件位置：u-boot/board/rockchip/common/mediaboot/sdmmcBoot.c
从名字就可以大概看出，这是操作sdmmc的，也就是eMMC或SD卡的地方，好的继续看函数。
uint32 SdmmcInit(uint32 ChipSel)
{
int32 ret1 = SDM_SUCCESS;
uint32 ioctlParam[5] = {0, 0, 0, 0, 0};
.....
ret1 = SdmmcReinit(ChipSel);
if (ret1 == SDM_SUCCESS) { /* 卡能识别 */
#ifdef EMMC_NOT_USED_BOOT_PART
ioctlParam[0] = ChipSel;
.....
/* id blk data */
ret1 = SDM_Read(ChipSel, SD_CARD_BOOT_PART_OFFSET, 4, gIdDataBuf);//这里就是加载eMMC中id block数据的地方
#ifdef RK_SDCARD_BOOT_EN
if (ChipSel == 0) {
if (gIdDataBuf[0] == 0xFCDC8C3B) {
gSdCardInfoTbl[ChipSel].FwPartOffset = SD_CARD_FW_PART_OFFSET;
if (0 == gIdDataBuf[128 + 104 / 4]) { /* sd卡升级 */
gsdboot_mode = SDMMC_SDCARD_UPDATE;
PRINT_E("SDCard Update.n");
} else if (1 == gIdDataBuf[128 + 104 / 4]) { /* sd 卡运行 */
gsdboot_mode = SDMMC_SDCARD_BOOT;
PRINT_E("SDCard Boot.n");
}
} else {
.....
return ERROR;
}
好的，从上面可以看出，gIdDataBuf里是存在eMMC上某个地方的数据，通过SDM_Read去读取加载的。
其实到这里，已经非常明确了，但是秉着一探到底的原则，我们继续往前~
看看SdmmcInit是哪里调用的？
经过grep跟踪大法一顿操作，加上分析，发现SdmmcInit是以方法结构体的方式存在于u-boot/board/rockchip/common/storage/storage.c文件中，具体如下：
#ifdef RK_SDMMC_BOOT_EN
static MEM_FUN_T emmcFunOp =
{
2,
BOOT_FROM_EMMC,
0,
SdmmcInit,
SdmmcReadID,
SdmmcBootReadPBA,
SdmmcBootWritePBA,
SdmmcBootReadLBA,
SdmmcBootWriteLBA,
SdmmcBootErase,
SdmmcReadFlashInfo,
SdmmcCheckIdBlock,
NULL,
NULL,
NULL,
SdmmcGetCapacity,
SdmmcSysDataLoad,
SdmmcSysDataStore,
SdmmcBootEraseData,
};
#endif
然后又被包含在了一个结构体指针数组里：
static MEM_FUN_T *memFunTab[] =
{
#ifdef RK_UMS_BOOT_EN
&UMSFunOp,
#endif
#ifdef RK_SDCARD_BOOT_EN
&sd0FunOp,
#endif
#if defined(RK_SDMMC_BOOT_EN) || defined(RK_SDHCI_BOOT_EN)
&emmcFunOp,
#endif
#ifdef RK_FLASH_BOOT_EN
&NandFunOp,
#endif
#ifdef CONFIG_RK_NVME_BOOT_EN
&nvmeFunOp,
#endif
};
最后被StorageInit调用：
#define MAX_MEM_DEV (sizeof(memFunTab)/sizeof(MEM_FUN_T *))
int32 StorageInit(void)
{
uint32 memdev;
memset((uint8*)&g_FlashInfo, 0, sizeof(g_FlashInfo));
for(memdev=0; memdev<MAX_MEM_DEV; memdev++)
{
gpMemFun = memFunTab[memdev];
if(memFunTab[memdev]->Init(memFunTab[memdev]->id) == 0)
{
memFunTab[memdev]->Valid = 1;
StorageReadFlashInfo((uint8*)&g_FlashInfo);
vendor_storage_init();
return 0;
}
}
/* if all media init error, usding null function */
gpMemFun = &nullFunOp;
return -1;
}
然后被在RK的板级逻辑u-boot/board/rockchip/rk32xx/rk32xx.c中的board_storage_init调用
int board_storage_init(void)
{
int ret = 0;
if (StorageInit() == 0) {
printf("storage init OK!n");
ret = 0;
} else {
printf("storage init fail!n");
ret = -1;
}
return ret;
}
而board_storage_init又在u-boot/arch/arm/lib/board.cuboot启动阶段被调用：
/************************************************************************
*
* This is the next part if the initialization sequence: we are now
* running from RAM and have a "normal" C environment, i. e. global
* data can be written, BSS has been cleared, the stack size in not
* that critical any more, etc.
*
************************************************************************
*/
void board_init_r(gd_t *id, ulong dest_addr)
{
ulong malloc_start;
#if !defined(CONFIG_SYS_NO_FLASH)
ulong flash_size;
#endif
.....
#ifdef CONFIG_ROCKCHIP
board_storage_init();//这里调用的
#endif
.....
#ifdef CONFIG_BOARD_LATE_INIT
board_late_init();
#endif
.....
/* main_loop() can return to retry autoboot, if so just run it again. */
for (;;) {
main_loop();
}
/* NOTREACHED - no way out of command loop except booting */
}
然后来到uboot最靠前的汇编s文件u-boot/arch/arm/lib/crt0.S里，调用了board_init_r这个C函数：
/* Set up final (full) environment */
bl c_runtime_cpu_setup /* we still call old routine here */
ldr r0, =__bss_start /* this is auto-relocated! */
ldr r1, =__bss_end /* this is auto-relocated! */
mov r2, #0x00000000 /* prepare zero to clear BSS */
clbss_l:cmp r0, r1 /* while not at end of BSS */
strlo r2, [r0] /* clear 32-bit BSS word */
addlo r0, r0, #4 /* move to next */
blo clbss_l
bl coloured_LED_init
bl red_led_on
/* call board_init_r(gd_t *id, ulong dest_addr) */
mov r0, r9 /* gd_t */
ldr r1, [r9, #GD_RELOCADDR] /* dest_addr */
/* call board_init_r */
ldr pc, =board_init_r /* this is auto-relocated! */
/* we should not return here. */
#endif
ENDPROC(_main)
四，总结
uboot在启动时，从eMMC某块区域读取了一定字节大小的数据，根据芯片厂商定义的偏移地址取出一组sn号，然后再用这串sn号以“androidboot.serialno=”前缀设进cmdline参数里，在启动kernel时传入，然后kernel将收到的cmdline数据写入到/proc/cmdline里，接着启动系统的第一个程序init程序，init程序从/proc/cmdline读出对应的“androidboot.serialno“数据以“ro.boot.serialno”名字设置属性，然后drmservice用init程序设置的"ro.boot.serialno"属性来设置“ro.serialno，最后系统通过getprop ro.serialno来获取，APP通过Build.getSerial()，Build.SERIAL来获取。
至此，大功告成
end
感谢阅读~
希望能帮到你~
see you~
码字不易，转载请注明原作者 ~ （from:https://erdong.work）
内容来源于网络如有侵权请私信删除
文章来源: 博客园
- 还没有人评论，欢迎说说您的想法！
客服
