作者:非法小恋

一、使用背景

Linux根目录磁盘空间不够用了,当修改了虚拟机模版增加磁盘大小或者插入了一块新硬盘,但是发现系统里的大小还是没改变。
产生的原因是没有给磁盘格式化,没有增加分区。

二、操作方法

1. 查看磁盘空间大小,使用df -h 命令,发现挂载根目录节点的/dev/mapper/ubuntu14--vg-root 只有28G容量。

root@ubuntu14:/opt# df -h
文件系统                       容量  已用  可用 已用% 挂载点
/dev/mapper/ubuntu14--vg-root   28G   23G  3.3G   88% /
none                           4.0K     0  4.0K    0% /sys/fs/cgroup
udev                           3.9G  4.0K  3.9G    1% /dev
tmpfs                          799M  384K  799M    1% /run
none                           5.0M     0  5.0M    0% /run/lock
none                           3.9G     0  3.9G    0% /run/shm
none                           100M     0  100M    0% /run/user
/dev/vda1                      236M   37M  188M   17% /boot

2. 增加磁盘空间,例如下图使用VM虚拟机增加的方式。

3.使用fdisk -l命令查看磁盘信息。当看到第一行Disk /dev/vda: 161.1 GB与实际df -h显示内容不符时,说明增加磁盘成功了。

root@ubuntu14:/opt# fdisk -l

Disk /dev/vda: 161.1 GB, 161061273600 bytes
16 heads, 63 sectors/track, 312076 cylinders, total 314572800 sectors
Units = 扇区 of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0001a023

   设备 启动      起点          终点     块数   Id  系统
/dev/vda1   *        2048      499711      248832   83  Linux
/dev/vda2          501758    62912511    31205377    5  扩展
/dev/vda5          501760    62912511    31205376   8e  Linux LVM

Disk /dev/mapper/ubuntu14--vg-root: 29.8 GB, 29804724224 bytes
255 heads, 63 sectors/track, 3623 cylinders, total 58212352 sectors
Units = 扇区 of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/ubuntu14--vg-root doesn't contain a valid partition table

Disk /dev/mapper/ubuntu14--vg-swap_1: 2147 MB, 2147483648 bytes
255 heads, 63 sectors/track, 261 cylinders, total 4194304 sectors
Units = 扇区 of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/ubuntu14--vg-swap_1 doesn't contain a valid partition table

4.使用fdisk /dev/vda, 创建新分区。

注意:不同操作系统的磁盘命名方式不同,有些是/dev/sda。具体使用方式参考第三步中fdisk -l首行显示Disk。如笔者在该系统中首行显示为Disk /dev/vda: 161.1 GB, 161061273600 bytes ,故使用命令fdisk /dev/vda

按照下面Linux操作进行分区。

root@ubuntu14:/opt# fdisk /dev/vda

命令(输入 m 获取帮助): m
命令操作
   a   toggle a bootable flag
   b   edit bsd disklabel
   c   toggle the dos compatibility flag
   d   delete a partition
   l   list known partition types
   m   print this menu
   n   add a new partition
   o   create a new empty DOS partition table
   p   print the partition table
   q   quit without saving changes
   s   create a new empty Sun disklabel
   t   change a partition's system id
   u   change display/entry units
   v   verify the partition table
   w   write table to disk and exit
   x   extra functionality (experts only)

命令(输入 m 获取帮助): n  #new 新分区
Partition type:
   p   primary (1 primary, 1 extended, 2 free)
   l   logical (numbered from 5)
Select (default p): p   #选择主分区
分区号 (1-4,默认为 3): 3  #分区序号
起始 sector (499712-314572799,默认为 499712):  #分区开始回车默认
将使用默认值 499712
Last sector, +扇区 or +size{K,M,G} (499712-501757,默认为 501757): 
将使用默认值 501757

命令(输入 m 获取帮助): n  #new 新分区
Partition type:
   p   primary (2 primary, 1 extended, 1 free)
   l   logical (numbered from 5)
Select (default p): p  #选择主分区
Selected partition 4   #分区序号
起始 sector (62912512-314572799,默认为 62912512):  #分区开始回车默认
将使用默认值 62912512
Last sector, +扇区 or +size{K,M,G} (62912512-314572799,默认为 314572799): 
将使用默认值 314572799

命令(输入 m 获取帮助): t   #修改分区格式
分区号 (1-5): 4    #修改分区号
Hex code (type L to list codes): 8e  #格式选择8e   linux LVM
Changed system type of partition 4 to 8e (Linux LVM)

命令(输入 m 获取帮助): p  #显示分区信息

Disk /dev/vda: 161.1 GB, 161061273600 bytes
16 heads, 63 sectors/track, 312076 cylinders, total 314572800 sectors
Units = 扇区 of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0001a023

   设备 启动      起点          终点     块数   Id  系统
/dev/vda1   *        2048      499711      248832   83  Linux
/dev/vda2          501758    62912511    31205377    5  扩展
/dev/vda3          499712      501757        1023   83  Linux
/dev/vda4        62912512   314572799   125830144   8e  Linux LVM
/dev/vda5          501760    62912511    31205376   8e  Linux LVM

Partition table entries are not in disk order

命令(输入 m 获取帮助): w  #保存信息
The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: 设备或资源忙.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.

5. 重启Linux操作系统,使用reboot命令。

6. 创建物理卷,使用pvcreate /dev/vda4命令。

root@ubuntu14:~# pvcreate /dev/vda4
  Physical volume "/dev/vda4" successfully created

7.查看新建的物理卷和大小,使用pvdisplay命令。

root@ubuntu14:~# pvdisplay
  --- Physical volume ---
  PV Name               /dev/vda5
  VG Name               ubuntu14-vg
  PV Size               29.76 GiB / not usable 2.00 MiB
  Allocatable           yes (but full)
  PE Size               4.00 MiB
  Total PE              7618
  Free PE               0
  Allocated PE          7618
  PV UUID               XR32TY-aRQC-IQC6-oCx7-aa9X-KdJe-bHmaBd
   
  "/dev/vda4" is a new physical volume of "120.00 GiB"
  --- NEW Physical volume ---
  PV Name               /dev/vda4
  VG Name               
  PV Size               120.00 GiB
  Allocatable           NO
  PE Size               0   
  Total PE              0
  Free PE               0
  Allocated PE          0
  PV UUID               MVK0IT-LDgP-eWwZ-fzQM-tdyY-4kRQ-nbk122

8. 将添加新的物理卷,加载到ubuntu14-vg卷组,使用vgextend ubuntu14-vg /dev/vda4命令。

root@ubuntu14:~# vgextend ubuntu14-vg /dev/vda4
Volume group "ubuntu14-vg" successfully extended

9. 查看卷组信息,使用vgdisplay命令。

root@ubuntu14:~# vgdisplay                  
  --- Volume group ---
  VG Name               ubuntu14-vg
  System ID             
  Format                lvm2
  Metadata Areas        2
  Metadata Sequence No  4
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               2
  Max PV                0
  Cur PV                2
  Act PV                2
  VG Size               149.76 GiB
  PE Size               4.00 MiB
  Total PE              38338
  Alloc PE / Size       7618 / 29.76 GiB
  Free  PE / Size       30720 / 120.00 GiB
  VG UUID               cq2Z6G-P6j1-S2gM-mibz-d63V-NjkS-dHYe7D

10.增加ubuntu14-vg大小,增加120G。使用lvresize -L +120G /dev/mapper/ubuntu14--vg-root命令。

root@ubuntu14:~# lvresize -L +120G /dev/mapper/ubuntu14--vg-root
  Extending logical volume root to 147.76 GiB
  Logical volume root successfully resized

11. 重新识别ubuntu14-vg大小,使用resize2fs /dev/mapper/ubuntu14--vg-root命令。

root@ubuntu14:~# resize2fs /dev/mapper/ubuntu14--vg-root
resize2fs 1.42.9 (4-Feb-2014)
Filesystem at /dev/mapper/ubuntu14--vg-root is mounted on /; on-line resizing required
old_desc_blocks = 2, new_desc_blocks = 10
The filesystem on /dev/mapper/ubuntu14--vg-root is now 38733824 blocks long.

12.查看扩容后的大小 ,使用df -h命令。

root@ubuntu14:~# df -h
文件系统                       容量  已用  可用 已用% 挂载点
/dev/mapper/ubuntu14--vg-root  146G   23G  117G   17% /
none                           4.0K     0  4.0K    0% /sys/fs/cgroup
udev                           3.9G  4.0K  3.9G    1% /dev
tmpfs                          799M  388K  799M    1% /run
none                           5.0M     0  5.0M    0% /run/lock
none                           3.9G     0  3.9G    0% /run/shm
none                           100M     0  100M    0% /run/user
/dev/vda1                      236M   37M  188M   17% /boot

当看到/dev/mapper/ubuntu14--vg-root 已经更新到新的大小时,则表示增加成功。
(转发请注明出处:http://www.cnblogs.com/zhangyongli2011/ 如发现有错,请留言,谢谢)

内容来源于网络如有侵权请私信删除
你还没有登录,请先登录注册
  • 还没有人评论,欢迎说说您的想法!